Lawn and Garden

Lawn + Garden

Lawn + Garden Projects

Brick Paver Edging

Print Page
brick pavers
BDSquareLogo

BLACK+DECKER B+D Contributor 193 Projects

Brick edging can be laid in several different configurations: on-end with its edge perpendicular to the paved surface (“soldiers”); on its long edges; or laid flat, either parallel or perpendicular to the paving. For mortared surfaces, brick can also be mortared to the edge of a concrete slab for a decorative finish

How to Install Brick Paver Edging

  1. Excavate the edge of the patio or walkway site using a flat shovel to create a clean, vertical edge. The edge of the soil (and sod) will support the outsides of the bricks.

  2. For edging with bricks set on-end, dig a narrow trench along the perimeter of the site, setting the depth so the tops of the edging bricks will be flush with the paving surface (or just above the surface for loose materials).

  3. Install the gravel subbase and landscape fabric into trench.

  4. Set the edging bricks into the trench after installing the gravel subbase and landscape fabric. If applicable, use your layout strings to keep the bricks in line and to check for the proper height.

  5. Backfill behind the bricks with soil and tamp well as you secure the bricks in place. Install the patio surface material. Tap the tops of the bricks with a rubber mallet and a short 2 x 4 to level them with one another

View All Lawn + Garden Projects