Due to its modular design, this bench can be mixed or matched with planters or other benches. Cedar wood enables this bench to withstand sun, rain, and even snow. This bench will enhance your enjoyment of your deck and its beauty.

CONSTRUCTION MATERIALS
Quantity	Lumber
1	2 × 4" × 8' cedar
1	2 × 4" × 6' cedar
4	2 × 2" × 8' cedar
1	2 × 6" × 6' cedar
1	4 × 4" × 6' cedar

Cutting List
Key	Part	Dimensions	Pcs.	Material
A	Sides	1 1/2 × 3 1/2 × 48"	2	Cedar
B	Ends	1 1/2 × 3 1/2 × 15"	2	Cedar
C	Slats	1 1/2 × 1 1/2 × 45"	8	Cedar
D	Stretchers	1 1/2 × 3 1/2 × 15"	2	Cedar
E	Braces	1 1/2 × 5 1/2 × 15"	4	Cedar
F	Legs	3 1/2 × 3 1/2 × 13"	4	Cedar

Note: Measurements reflect the actual thickness of dimensional lumber.

MAKE THE FRAME.

The butt joints make this bench sturdy and easy to construct. For strength and good looks, we used gold-colored deck screws.

1. Measure, mark and cut the sides (A) and ends (B) to length, using a circular saw.

2. Position the ends between the sides so the edges are flush. Measure from corner to corner. When the diagonals are equal the frame is square.

3. Drill 1/8" pilot holes through the sides and into the ends. Fasten the sides to the ends by driving 3" gold-colored screws through the pilot holes.

BUILD THE SEAT.

The slats that make up the seat are spaced 3/8" apart to allow rain water to run off.

1. Cut the slats (C) to length using a circular saw.

APPLY THE FINISHING TOUCHES.

1. Sand all surfaces with 150-grit sandpaper. Be sure to sand edges thoroughly so bare legs will not be scratched.

2. Because cedar is naturally resistant to decay, it will age to a natural gray. To preserve its reddish color, you can apply a clear sealer as we did. Cedar is also suitable for painting.